Turned Eye Bolt

Attractive Mediaz on August 8, 2022

Turned Eye Bolt

Back

Turned Eye Bolts  are designed for through-hole applications. Use them for routing wire and for other light duty applications.

Zinc-plated steel eyebolts offer good corrosion resistance.

Black-oxide steel eyebolts are more corrosion resistant than zinc-plated steel.

304 stainless steel eyebolts are more corrosion resistant than black-oxide steel.

316 stainless steel are the most corrosion resistant eyebolts.

Closed eyes are stronger than bent-closed eyes.

TURNED EYE BOLTS

Steel

Zinc plated

DIAMETER THREAD
LENGTH 3/16 1/4 5/16 3/8 1/2
1 S S S S S
1 1⁄2 S S S S S
2 S S S S S
2 1⁄2 S S S S S
3 S S S S S
3 1⁄2 S S S S S
4 S S S S S
5 S S S S S
6 S S S S S
8 S S S S S
10 S S S S S
12 S S S S S

S-denotes normally stocked unlisted items may be available

Eye Nut

Attractive Mediaz on August 8, 2022

Eye Nut

Back

Create your own lifting eye by adding an eye nut to a stud or bolt.

You can thread the unthreaded eye nuts, also known as blank eye nuts, to suit your application.

Zinc-plated steel eye nuts offer good corrosion resistance.

Galvanized steel eye nuts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.

304 stainless steel eye nuts are more corrosion resistant than galvanized steel.

Capacity applies to the eye nut only. The stud or bolt you use will affect the overall capacity. Eye nuts are for vertical lifting only.

316 stainless steel are the most corrosion resistant eye nuts.

Note: Capacity applies to the eye nut only. The stud or bolt you use will affect the overall capacity. Eye nuts are for vertical lifting only.

A
B
C

Inch-Fully Threaded

Thread Size Overall Lg. Eye Dia Vertical Capacity, lbs.
Steel
B3/8″-16 2 1/4″ 7/8″ 1,800
B1/2″-13 3″ 1 1/8″ 3,600
B 5/8″-11 3 3/4″ 1 3/8″ 5,800
B3/4″-10 3 7/8″ 1 1/2″ 10,600
B7/8″-9 3 7/8″ 1 5/8″ 14,400
B 1″-8 4 3/4″ 1 3/4″ 18,800
B1 1/8″-7 4 3/4″ 1 3/4″ 22,600
B1 1/4″-7 5 1/2″ 2″ 29,400
B1 1/2″-6 6 1/2″ 2 1/2″ 35,600
C1/4″-20 1 11/16″ 3/4″ 500
C5/16″-18 1 11/16″ 3/4″ 825
C7/16″-14 2 1/2″ 1 1/4″ 1700
Thread Size Overall Lg. Eye Dia Vertical Capacity, lbs.
Galvanized Steel
C1/4″-20 1 5/8″ 3/4″ 500
C5/16″-18 1 5/8″ 3/4″ 825
C3/8″-16 2″ 1″ 1225
C7/16″-14 2 1/2″ 1 1/4″ 1700
C1/2″-13 2 1/2″ 1 1/4″ 2,225
C5/8″-11 3 1/8″ 1 1/2″ 3,600
C3/4″-10 3 7/8″ 1 3/4″ 5,200
C7/8″-9 4 1/4″ 2″ 7,200
C1″-8 5″ 2 1/4″ 10,000
C1 1/4″-7 5 3/4″ 2 1/2″ 15,500
C1 1/2″-6 7″ 3 1/8″ 22,500
C2″-4 1/2 9 15/16″ 4 1/8″ 40,000
Thread Size Overall Lg. Eye Dia Vertical Capacity, lbs.
Zinc Plated Steel
A1/4″-20 1 7/16″ 13/16″ 200
A5/16″-18 1 7/16″ 13/16″ 300
A3/8″-16 1 3/4″ 15/16″ 500
A1/2″-13 2″ 1 3/16″ 725
A5/8″-11 2 1/2″ 1 3/8″ 1,525
A3/4″-10 2 3/4″ 1 9/16″ 2,625
A3/4″-10 3 9/16″ 1 15/16″ 3,075
A1″-8 3 1/2″ 1 15/16″ 3,950
A1 1/4″-7 5″ 2 3/4″ 7,050
A1 1/2″-6 5 3/4″ 3 1/8″ 10,125
Thread Size Overall Lg. Eye Dia Vertical Capacity, lbs.
316 Stainless Steel
B3/8″-16 2 1/4″ 7/8″ 1,800
B1/2″-13 3″ 1 1/8″ 3,600
B5/8″-11 3 3/4″ 1 3/8″ 5,800
B3/4″-10 3 7/8″ 1 1/2″ 10,600
C1/4″-20 1 5/8″ 3/4″ 500
C5/16″-18 1 5/8″ 3/4″ 825
C3/8″-16 2 1/2″ 1 1/4″ 1,225
C1/2″-13 2 1/2″ 1 1/4″ 2,225
C5/8″-11 3 1/8″ 1 1/2″ 3,600
C3/4″-10 3 7/8″ 1 3/4″ 5,200

Rod End Eye Bolt

Attractive Mediaz on August 8, 2022

Rod End Eye Bolt

Back

Rod ends are connectors that support loads and allow motion control. You’ll find them in a multitude of applications: steering, tensioning, and controlling movement at pivot points.ance.

Ball Joint Road Endss—Have an eyelet and a ball that swivels to support angular misalignment in any direction. They’re also known as rod-end bearings. Ball Joint Linkages are ball joint rod ends with a stud attached to simplify mounting.

Rod End Bots—Also known as swing bolts and eyebolts, rod end bolts have no moving parts and are designed for pivoting or hinge movements that cannot allow angular misalignment.

Corrosion-Resistant Fully Threaded Rod End Bolts

These rod end bolts are good for wet and corrosiveenvironments—for maximum mounting flexibility,cut the fully threaded shaft to whatever length you need.

Fully Threaded Rod End Bolts

Good for general purpose applications where corrosion and high strength aren’t a concern, these rod end bolts are made of carbon steel.

High-Strength Fully Threaded Rod End Bolts

These alloy steel rod end bolts have the highest tensile strength of any fully threaded rod end bolt we offer.

Partially Threaded Rod End Bolts

Create pivoting connections in applications that require high shear strength—the partially threaded shank of these rod end bolts withstands more side force than a fully threaded shank.

Internally Threaded Rod End Bolts with Partial Threads

Also known as swing bolts and eyebolts,these internally threaded rod end bolts have no moving parts. They’re designed to make pivoting or hinge movements in applications that don’tneed to compensate for misalignment.

Corrosion-Resistant Partially Threaded Rod End Bolts

Pivot and hinge components in wet and corrosive environments with these stainless steel or brass rod end bolts.

Flat-Shoulder Rod End Bolts

These black-oxide steel rod end bolts are heat treated for added strength.

Corrosion-Resistant Flat-Shoulder Rod End Bolts

Made of stainless steel, these rod end bolts are stronger and more corrosion resistant than our standard flat-shoulder rod end bolts.

Forged Plain Eye Bolt

Attractive Mediaz on August 8, 2022

Forged Plain Eye Bolt

Back

Zinc-plated steel eyebolts offer good corrosion resistance.

Galvanized steel eyebolts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.

304 stainless steel eyebolts are more corrosion resistant than galvanized steel.

316 stainless steel are the most corrosion resistant eyebolts.

Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend hoist rings. Eyebolts without shoulder are for vertical lifting only.

PLAIN PATTERN

Forged / ASTM A489 1030 carbon steel self colored

Thread size of UNC-2A
A		 Shank Length
B		 I.D. eye
C		 O.D. eye
D		 Overall Length
E		 Rated Capacity
1/4-20 1 1⁄4 1 3⁄16 2 7⁄12 500
5/16-18 1 1⁄8 7⁄8 1 7⁄16 2 19⁄12 900
3/8-16 1 1⁄4 1 1 11⁄16 3 1,300
7/16-14 1 3⁄8 1 3⁄32 1 13⁄16 3 7⁄12 1,800
1/2-13 1 1⁄2 1 3⁄16 2 1⁄8 3 21⁄12 2,400
5/8-11 1 3⁄4 1 3⁄8 2 9⁄16 4 3⁄8 4,000
3/4-10 2 1 1⁄2 2 13⁄16 4 7⁄8 5,000
7/8-9 2 1⁄8 1 11⁄16 3 2⁄16 5 1⁄2 7,000
1-8 2 1⁄2 1 13⁄16 3 9⁄16 6 1⁄8 9,000
1-1/8-7 2 3⁄4 2 4 1⁄16 6 7⁄8 12,000
1-1/4-7 3 2 1⁄16 4 7⁄16 7 1⁄2 15,000
1-1/2-6 3 1⁄2 2 1⁄2 5 3⁄16 8 1⁄2 21,000
1-3/4-5 3 1⁄4 2 7⁄8 6 9 11⁄16 28,000
2-4 1⁄2 4 3 1⁄4 6 7⁄8 11 38,000
2-1 2⁄4 5 4 8 1⁄2 13 5⁄8 56,000

Lag Screw Eyes

Attractive Mediaz on August 8, 2022

Lag Screw Eyes

Back

With threads on one end, screw eyes can be easily screwed into wood. They are often used with wire to hang pictures.

Lag Screw Eyes

Steel, Zinc Plated, & Stainless Steel Available

DIAMETER THREAD
LENGTH 3/16 1/4 3/16 3/4 1/2
2 3⁄4 S S
3 S S
3 1⁄2 S
4 S S
4 3⁄4 S
6 S

S-denotes normally stocked | Unlisted items may be available

Machinery eye bolts

Attractive Mediaz on August 5, 2022

Machinery eye bolts

Back

Zinc-plated steel eyebolts offer good corrosion resistance.

304 stainless steel eyebolts are more corrosion resistant than galvanized steel.

316 stainless steel are the most corrosion resistant eyebolts.

Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend hoist rings. Eyebolts without shoulder are for vertical lifting only.

Galvanized steel eyebolts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.

SHOULDER PATTERN

Forged / ASTM A489 1030 carbon steel self colored

Thread size of UNC-2A
A		 Shank Length
B		 I.D. eye
C		 O.D. eye
D		 Overall Length
E		 Center of eye to sholuder
F		 Width of shoulder Rated Capacity
1/4-20 1 1⁄4 1 3⁄16 2 3⁄8 3⁄4 17⁄32 500
5/16-18 1 1⁄8 7⁄8 1 7⁄16 2 13⁄16 15⁄18 19⁄32 900
3/8-16 1 1⁄4 1 1 11⁄16 3 1⁄4 1 3⁄8 21⁄32 1,300
7/16-14 1 3⁄8 1 3⁄32 1 13⁄16 3 9⁄16 1 1⁄2 25⁄32 1,800
1/2-13 1 1⁄2 1 3⁄10 2 1⁄8 3 31⁄32 1 3⁄8 29⁄32 2,400
5/8-11 1 3⁄4 1 3⁄8 2 9⁄16 4 3⁄4 1 21⁄32 1 8⁄32 4,000
3/4-10 2 1 1⁄2 2 13⁄16 5 3⁄4 1 13⁄16 1 3⁄16 5,000
7/8-9 2 3⁄4 1 11⁄16 3 3⁄16 6 2 1⁄6 1 3⁄8 7,000
1-8 2 1⁄2 1 13⁄16 3 9⁄16 6 5⁄8 2 5⁄16 1 9⁄16 9,000
1-1/8-7 2 3⁄4 2 4 1⁄16 7 17⁄32 2 11⁄16 1 1⁄4 12,000
1-1/4-7 3 2 3⁄16 4 7⁄16 8 7⁄32 2 15⁄16 1 35⁄16 15,000
1-1/2-6 3 8⁄2 2 8⁄2 5 3⁄16 9 15⁄32 3 5⁄18 2 3⁄16 21,000
1-3/4-5 3 3⁄4 2 7⁄8 6 10 13⁄36 4 2 3⁄2 28,000
1-4 1⁄2 4 3 1⁄2 6 7⁄8 11 7⁄8 4 3⁄8 2 7⁄8 38,000